Total
2234 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-54429 | 2026-07-14 | 7.4 High | ||
| A vulnerability has been identified in SIMATIC S7-PLCSIM Advanced (All versions). Affected devices do not properly handle high-volume multicast network traffic, which can exhaust available memory resources in the affected application. This could allow an unauthenticated attacker on the local network segment to cause a denial-of-service condition of the affected application. The affected application becomes inaccessible and requires a manual restart; no project data is lost. Successful exploitation requires a specific project configuration to be already active on the targeted instance. | ||||
| CVE-2026-59246 | 1 Elixir-mint | 1 Mint | 2026-07-14 | N/A |
| Allocation of resources without limits vulnerability in elixir-mint mint allows a remote HTTP/2 server to exhaust memory on the client host and cause a denial of service. The Mint.HTTP2.handle_continuation/3 function in lib/mint/http2.ex accumulates the header-block fragment carried by each HTTP/2 CONTINUATION frame into a growing conn.headers_being_processed nesting, one level deeper per frame, and only releases it when a frame with the END_HEADERS flag arrives. The only guard on this accumulator is Mint.HTTP2.assert_header_block_within_max_size/2, which sums the byte size of the fragments received so far. Because a CONTINUATION frame is permitted by the protocol to carry a zero-length payload, an unbounded chain of zero-length CONTINUATION frames adds no bytes to the running total, never trips the size cap, and never emits END_HEADERS, yet each frame still nests the accumulator one level deeper. A malicious HTTP/2 server (reachable directly, via an attacker-controlled redirect, via SSRF, or via a man-in-the-middle) can open a stream by sending a HEADERS frame without END_HEADERS and then stream zero-length CONTINUATION frames indefinitely. Client memory grows one cons cell per frame received; sustained bandwidth from the peer drives the BEAM node running the Mint client to memory exhaustion and eventual out-of-memory termination. This issue affects mint: from 0.1.0 before 1.9.2. | ||||
| CVE-2026-58229 | 1 Elixir-mint | 1 Mint | 2026-07-14 | N/A |
| Allocation of resources without limits vulnerability in elixir-mint mint allows a remote HTTP server to exhaust memory on the client host and cause a denial of service. The Mint.HTTP1.decode_headers/5 and Mint.HTTP1.decode_trailer_headers/4 functions in lib/mint/http1.ex accumulate every parsed response header and chunked-trailer field into a per-request list that persists across incoming TCP segments as request.headers_buffer, and only clear it when the terminating blank line is received. The section has no cap on the number of headers or on total bytes, and the underlying :erlang.decode_packet(:httph_bin, binary, []) parser is invoked with an empty option list so its per-line and per-packet size limits also default to unlimited. A malicious HTTP server (reachable directly, via an attacker-controlled redirect, via SSRF, or via a man-in-the-middle) can stream complete header lines (or, after a chunked body, complete trailer lines) indefinitely without ever emitting the terminating blank line. The connection state grows without bound until the BEAM node is killed by the operating system's out-of-memory handler, taking down the entire application that uses Mint as an HTTP client. This issue affects mint: from 0.1.0 before 1.9.2. | ||||
| CVE-2026-59161 | 1 Qax-os | 1 Excelize | 2026-07-14 | N/A |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. Prior to 2.11.0, the streaming worksheet reader used by Rows and GetRows does not enforce the TotalRows limit on the row r attribute, allowing a small XLSX file with a row number above 1048576 and no cell coordinate to make GetRows append empty rows up to the attacker-controlled index and consume excessive memory and CPU. This issue is fixed in version 2.11.0. | ||||
| CVE-2026-58488 | 1 Hedgedoc | 1 Hedgedoc | 2026-07-14 | N/A |
| HedgeDoc is an open source, real-time, collaborative, markdown notes application. Versions prior to 1.11.0 allowed attackers to circumvent the rate-limiting of the /login and /register routes by spoofing IP addresses. HedgeDoc instances checked for CloudFlare's cf-connecting-ip header and used that instead of the users real IP address, if the header was present even when the request did not originate from Cloudflare. This made it possible for an attacker to spam login requests or create multiple arbitrary accounts by sending another cf-connecting-ip header every few requests. The issue has been fixed in version 1.11.0. | ||||
| CVE-2026-54428 | 2026-07-13 | 7.5 High | ||
| Allocation of resources without limits or throttling in the HTTP/2 HPACK decoder in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending oversized compressed header blocks before the HTTP/2 SETTINGS acknowledgement causes the configured header list size limit to be applied. | ||||
| CVE-2026-57212 | 1 Rabbitmq | 1 Rabbitmq-server | 2026-07-13 | N/A |
| RabbitMQ is a messaging and streaming broker. Prior to 3.13.14, 4.0.19, 4.1.10, and 4.2.5, the rabbitmq_management HTTP API accepts oversized valid JSON bodies on with_decode and direct_request paths because read_complete_body checks the accumulated size before the final chunk but not the final combined size. This issue is fixed in versions 3.13.14, 4.0.19, 4.1.10, and 4.2.5. | ||||
| CVE-2026-54063 | 1 Qax-os | 1 Excelize | 2026-07-13 | 7.5 High |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. Prior to 2.11.0, the checkSheet() function in github.com/xuri/excelize/v2 uses an attacker-controlled <row r="N"> XML attribute value directly as the length argument to make([]xlsxRow, row) without validating it against the Excel row limit (TotalRows = 1,048,576). A specially crafted XLSX file can trigger two denial-of-service variants: (A) an out-of-memory process kill when r=2147483647 forces a ~16 GB allocation attempt, and (B) a runtime panic via out-of-bounds slice indexing when r=-1. Any service that opens attacker-supplied XLSX files and calls GetCellValue is affected. No authentication is required. This issue is fixed in version 2.11.0. | ||||
| CVE-2026-56309 | 1 Cap-go | 1 Cap-go | 2026-07-13 | 5.4 Medium |
| Capgo before 12.128.2 fails to enforce plan/quota restrictions on the /files/upload/attachments endpoint, allowing plan-blocked apps to create publicly readable R2 objects. Attackers can upload arbitrary attachments using upload-scoped API keys that bypass plan checks, persist outside normal bundle metadata, and survive app deletion, enabling storage and bandwidth abuse. | ||||
| CVE-2026-21728 | 1 Grafana | 1 Tempo | 2026-07-13 | 7.5 High |
| Tempo queries with large limits can cause large memory allocations which can impact the availability of the service, depending on its deployment strategy. Mitigation can be done by setting max_result_limit in the search config, e.g. to 262144 (2^18). Alternatively, automatically restart the service. | ||||
| CVE-2026-14683 | 1 Hdrhistogram | 1 Hdrhistogram | 2026-07-12 | 3.3 Low |
| A vulnerability was detected in HdrHistogram up to 2.2.2. Affected by this issue is the function org.HdrHistogram.AbstractHistogram.decodeFromCompressedByteBuffer of the file src/main/java/org/HdrHistogram/AbstractHistogram.java. The manipulation of the argument lengthOfCompressedContents results in uncontrolled memory allocation. The attack needs to be approached locally. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-61465 | 1 Imagemagick | 1 Imagemagick | 2026-07-11 | 3.3 Low |
| ImageMagick before 7.1.2-26 and 6.9.13-51 is missing a check for the allowed memory allocation limit in matrix-backed operations such as -canny. An attacker can supply a crafted image that causes ImageMagick to allocate more memory than permitted by the configured policy, resulting in a denial of service. | ||||
| CVE-2026-57220 | 1 Rabbitmq | 1 Rabbitmq-server | 2026-07-10 | 7.5 High |
| RabbitMQ is a messaging and streaming broker. Prior to 4.2.6, the RabbitMQ stream listener does not enforce the configured stream frame-size limit while assembling frames during authentication and before Tune negotiation, allowing an unauthenticated remote client to declare oversized frame lengths and consume broker memory in rabbit_stream_core. This issue is fixed in version 4.2.6. | ||||
| CVE-2026-53653 | 1 Getgrav | 1 Grav | 2026-07-10 | N/A |
| Grav is a file-based Web platform. Prior to 1.7.53 and 2.0.0-rc.8, Grav allows an unauthenticated visitor to exhaust server memory and CPU by requesting image derivatives with oversized dimensions through URL query image actions such as forceResize in Grav::fallbackUrl, which passes request parameters to ImageMedium magic actions without a dimension or pixel ceiling. This issue is fixed in versions 1.7.53 and 2.0.0-rc.8. | ||||
| CVE-2026-58661 | 1 N8n | 1 N8n | 2026-07-10 | N/A |
| n8n before 2.28.0 (and before 1.123.58 on the 1.x branch) contains a disk space exhaustion vulnerability in the data-table file upload endpoint. The per-request quota check does not account for files already written to the shared temporary directory, allowing an authenticated user to repeatedly upload files that accumulate on disk until the periodic cleanup runs, potentially exhausting available disk space on the host. | ||||
| CVE-2026-42127 | 1 Grafana | 2 Grafana, Grafana Enterprise | 2026-07-10 | 7.5 High |
| The public dashboard query endpoint does not limit request body size before processing, allowing unauthenticated attackers to trigger excessive memory allocation by sending arbitrarily large JSON payloads. This can lead to denial of service through memory exhaustion. No valid dashboard access token or authentication is required to exploit this vulnerability. | ||||
| CVE-2026-40006 | 1 Apache | 1 Iotdb | 2026-07-10 | 7.5 High |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits or Throttling, Missing Authentication for Critical Function vulnerability in Apache IoTDB. When pipe_air_gap_receiver_enabled=true, the IoTDB AirGap pipe receiver accepts raw TCP connections on port 9780 with no authentication. The readLength method reads an attacker-controlled 32-bit integer from the socket and readData passes it directly to new byte[length] with no upper-bound check. An unauthenticated attacker can cause the JVM to attempt an allocation of up to 2,147,483,647 bytes per connection, exhausting heap memory and crashing or severely degrading the DataNode process. This issue affects Apache IoTDB: from 1.0.0 before 2.0.10. Users are recommended to upgrade to version 2.0.10, which fixes the issue. | ||||
| CVE-2026-56814 | 1 Elixir-plug | 1 Plug | 2026-07-10 | N/A |
| Plug.Parsers.MULTIPART, the multipart request-body parser used to handle file uploads and multipart forms, does not enforce its :length budget against all consumed resources, allowing an unauthenticated remote attacker to cause denial of service. The parser charges the :length limit only for part body bytes; part header bytes are never counted, and a part with an empty body costs zero. Because every part whose Content-Disposition carries a non-empty filename creates a fresh temporary file (via Plug.Upload) and retains a Plug.Upload struct for the duration of the request, an attacker can send a single request composed of many empty-body file parts. Such a request stays well under the configured :length limit (8,000,000 bytes by default) while creating one temporary file per part, leading to inode and disk exhaustion and unbounded memory growth. Any application using Plug.Parsers with the :multipart parser is affected, and no authentication is required, only reachability of a multipart endpoint over HTTP. This vulnerability is associated with program files lib/plug/parsers/multipart.ex and program routines Plug.Parsers.MULTIPART.parse_multipart/2, Plug.Parsers.MULTIPART.parse_multipart_headers/5, Plug.Parsers.MULTIPART.parse_multipart_body/4, and Plug.Parsers.MULTIPART.parse_multipart_file/4. This issue affects plug: from 1.4.0 before 1.16.6, from 1.17.0 before 1.17.4, from 1.18.0 before 1.18.5, from 1.19.0 before 1.19.5, and from 1.20.0 before 1.20.3. | ||||
| CVE-2026-49146 | 1 Petdance | 1 App::ack | 2026-07-10 | 7.5 High |
| App::Ack versions before 3.10.0 for Perl allow memory exhaustion via an unbounded context value in a project .ackrc. ack searches up the directory hierarchy from the current directory for a project .ackrc and loads its options. The -B and -C context options accepted any positive integer, and ack sized the before-context buffer to that value, so a project .ackrc setting --before-context=100000000 made ack allocate a buffer of 100 million elements. A project .ackrc committed to an untrusted repository can abort ack with an out-of-memory condition. | ||||
| CVE-2026-12590 | 1 Body-parser | 1 Body-parser | 2026-07-10 | 3.7 Low |
| Impact: In body-parser versions prior to 1.20.6 (1.x line) and 2.3.0 (2.x line), when the parser is configured with an invalid limit option value such as an unparseable string or NaN, bytes.parse returns null and the request body size check is silently skipped. Applications that rely on limit as their primary safeguard against oversized request bodies will accept arbitrarily large payloads, leading to excessive memory and CPU usage and denial of service. Patches: This issue is fixed in body-parser 1.20.6 and 2.3.0. After the fix, invalid limit values throw a clear error at parser construction time instead of silently disabling enforcement, while null and undefined continue to fall back to the default limit of 100kb. Workarounds: Validate the limit value before passing it to body-parser. For example, parse the value at startup and reject any configuration where the result is null or a non-finite number. | ||||